Cino PL680BT HC - Manual (Page 67)

W
ir
eless FuzzyScan
R
efer
ence Man
ual
Configure Your FuzzyScan
59
PROGRAM
Serial Interface Control
♦ Record Suffix, Preamble ,Postamble Setting ♦
F_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
STX/ETX Control SS
SS Disable STX/ETX transmission
Enable STX/ETX transmission
STX/ETX are two characters used to indicate the starting and ending of the total
data frame transmitted via serial interface. 0
1
Record Suffix SS
SS
SS
SS
SS
SS
MS
None
CR (0DH)
LF (0AH)
CRLF (0D0AH)
TAB (09H)
SPACE (20H)
User defined character (1 character) 0
1
2
3
4
5
6, (00-7F)
Preamble SS
MS
None
1-15 characters
Maximum 15-character input; scan “FIN” to terminate this selection. FIN
[00-7F], [FIN]
Postamble SS
MS
None
1-15 characters
Maximum 15-character input; scan “FIN” to terminate this selection. FIN
[00-7F], [FIN]
FNC1 Symbol Char. Transmit
SS
SS Disable
Enable
When this function is enabled and the FNC1 is contained in scanned data, the
scanner transmits the FNC1 to the host. Chart of the FNC1 is provided in Appendix –
Keyboard Function Code Table. When the scanner interface is set to keyboard, the
scan code is converted to corresponding key function before it is transmitted
0
1
Serial Interface Message String (RS232, USB COM) :
STX Preamble Data Length Prefix Symbol ID Scanned Data Suffix Symbol ID Postamble ETX Record Suffix
1 character 1-15 characters 2-4 digits 1 or 3 characters Variable length 1 or 3 characters 1-15 characters 1 character 1 character