Dillon Precision Square Deal 'B' - Manual (Page 8)

Fig. 5 – Slide the cartridge collection box (#13756)
onto the chute bracket (#13659) as shown.
Fig. 6 – The locator buttons must be placed at Stations
2, 3 and 4 to prevent the cartridge from sliding off of the
shellplate. The buttons can be removed to access the case
at these stations.
Fig. 7 – Remove the cap from the top of the powder
die (#13865). The cap retains the expander/powder funnel
during shipping.
Fig. 8 – Make sure the expander/powder funnel is free
to move in the powder die and reinsert it as shown.
Fig. 9 – With the cap removed and the
expander/powder funnel in position, you are now ready
to install the powder measure. Place the powder measure
on top of the powder die.
Fig. 7
Fig. 8
Fig. 9
8
Fig. 5
Fig. 6
May 2007 Square Deal B Manual 5/17/07 2:23 PM Page 8