Ditch Witch RT80 - Manual (Page 107)

Reel Carrier - 106
RT80Q Operator’s Manual
Setup
CMW
Setup
Adjust Reel Winder
1. Lower reel carrier.
2. Turn ignition switch to STOP.
3. Remove reel.
4. While supporting lever arm (3), remove
bolt (1) that attaches hydraulic lift cylinder
to lever arm.
5. Attach cylinder rod to the correct mounting
hole for your diameter reel:
• For 2-5’ (61-152 cm) diameter reels,
attach to bottom mounting hole (1).
• For 5-7’ (152-213 cm) diameter reels,
attach to top mounting hole (2).
Read operator’s manual. Know how to use all controls
before operating machine. When you see this sign on the machine or
in the manual, read it and use caution. Your safety is at stake.
Crushing weight could cause death or serious
injury. Use proper procedures and equipment or stay away.