Ditch Witch RT80 - Manual (Page 151)

Service - 150
RT80Q Operator’s Manual
10 Hour
Check Trench Cleaner Position
Check trench cleaner position (if equipped) every
10 hours, or anytime the digging chain is adjusted
or replaced. The trench cleaner is properly
positioned when there is 3-4 in (76-102 mm)
between the digging teeth and the inside of the
trench cleaner shoe (A).
Check that bolts holding personnel restraint bar/
trench cleaner to arm are tightened to 350 ft•lb
(475 N•m). Apply Loctite 271
®
adhesive.
Plow
Lube Plow Pivots
Lube pivots every 10 hours with EPG.
Check Plow Vibrator Oil Level
Check plow vibrator oil on each side of vibrator
every 10 hours. With vibrator horizontal, oil
should be halfway up sight glass (2). Add MPL as
needed at fill (1).
IMPORTANT: Do not add oil to plow vibrator
when hot. Let plow vibrator cool before
removing fill plug.
A
A
t33om90w.eps