Dream Property DM7080 HD - Manual (Page 56)

AC3 downmix If you’re watching a show with a AC3 audio track it will be changed into a stereo signal. Set
this option to “yes” if your have an AV-Receiver that does not support Dolby Digital.
General AC3 Delay With this option you can adjust a delay of the AC3 signal. This might be helpful, if the
sound (on activated AC3 output) is to hear sooner or later than the picture. The adjusted value has
affect on all channels. With the Navigation-Buttons (
) you can adjust a delay in 25ms-Steps.
General PCM Delay With this option you can adjust a delay of the PCM signal. This might be helpful, if
the sound (on activated AC3 output) is to hear sooner or later than the picture. The adjusted value
has affect on all channels. With the Navigation-Buttons (
) you can adjust a delay in 25ms-Steps.
Convert AC3+ to AC3 You can choose between the following options:
always The AC3+ stream will be always converted to a AC3 stream.
controlled by HDMI If the connected HDMI device supports the format AC3+, the AC3+ signal will
be forwarded without altering it, otherwise the AC3+ stream will be converted to a AC3 stream.
OSD visibility With the Navigation-Buttons ( ) you can change the transparency of the gui.
Scaler sharpness With the Navigation-Buttons ( ) you can change the sharpness of the screen.
6.5 OLED-Display
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons ( ) choose the option “Setup” and press the OK-Button.
3. With the Navigation-Buttons ( ) choose the option “System” and press the OK-Button.
4. With the Navigation-Buttons ( ) choose the option “Display Setup” and press the OK-Button.
Now you can set the brightness of the OLED-display for standby and operation mode.
Operation
1. With the Navigation-Buttons ( ) choose the option “Operation”.
2. With the Navigation-Buttons ( ) choose the brightness of the OLED-Display for operation mode.
Idle Mode
1. With the Navigation-Buttons ( ) choose the option “Idle Mode”.
2. With the Navigation-Buttons ( ) choose the brightness of the OLED-Display for idle mode.
6.6 Network
6.6.1 Connection via network cable
Adapter-Settings
1. Press the Menu-Button to open the main OSD menu.
51