Dream Property DM7080 HD - Manual (Page 59)

6.7 Common-Interface
CI-Module
Smartcard
Use of the ci slot
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons ( ) choose the option “Setup” and press the OK-Button.
3. With the Navigation-Buttons ( ) choose the option “Common-Interface” and press the OK-
Button
.
Reset This options resets your CI-Module. This function is needed if you are experiencing trouble with one
of your encrypted services.
Init This option initializes an inserted Smartcard. It is recommended to insert the CI-Module with the
Smartcard already in it.
No module found No CI-Module is inserted into the slot. If you have inserted one the name and firmware
version will show. Navigate to this option and press the OK-Button to get to the extended options of
the inserted CI-Module. The option strongly depend on the type of module inserted and therefore will
not be explained in detail. Refer to the user‘s manual of your CI-Module for additional information
on this topic.
Can decrypt multiple services You can set if your CI-Module can decrypt multiple services or not. Please
note that not every CI Module supports this feature. Check the instruction manual of your CI-Module
for information about this feature. The “Auto” option only works with so called Alphacrypt Modules.
The Exit-Button will quit this menu.
High bitrate support You can set if your CI-Module can process high bitrates (30.000). Please note that
not every CI Module supports this feature. Check the instruction manual of your CI-Module for
information about this feature.
6.8 Skin
1. Press the Menu-Button to open the main OSD menu.
54