Hard disk setup, Recording a movie (spontaneous recording) – Dream Property DM7000 User Manual
Page 47

- 47 -
37. Hard
Disk
Setup
Press the DREAM-Button to enter the OSD-Mainmenu.
Go to (6) Setup -> (3) System Settings -> (3) Harddisc Setup -> select the Harddisc.
This Menu shows the major Information about the
installed Harddisc.
Before formating the Harddisc, please select from
the right arrow dropdown menu a filesystem which
the Harddisc will be formated with. Choose an “ext3”
or “reiserfs” filesystem pressing the OK-Button.
The “ext3” is a faster filesystem.
The “reiserfs” is a saver filesystem.
Press the red Option-Button to format.
Press the yellow Option-Button to check the
Filesystem.
Please shutdown the Dreambox after formating.
38.
Recording a movie (spontaneous recording)
Attention:
The Infobar disappears after a couple of
seconds. Press the OK-Button to bring up the
Infobar.
During PVR-Mode the Option-Buttons are
assigned as follows:
RADIO-Button: start recording
TV-Button: stop
red Option-Button: fast rewind
green Option-Button: start playback
yellow Option-Button: pause
blue Option-Button: fast forward
Select a Service you want to record from the
Servicelist. This could be either a TV or Radio
service. Press the VIDEO-Button to activate the
PVR-Mode. The Infobar shows the PVR control
symbols. Press the RADIO-Button to start a
spontaneous recording. During recording, the
Infobar displays a little blinking red dot. This means
that a recording is still in process.
You can watch another service from the same
Transponder during record. Press the Navigation-
Button up or down to bring up the Servicelist. All
possible services will be shown. Select another
service. The recording proceeds in the background.
Remember to press the VIDEO-Button to activate
the PVR-Mode after switching to another service
during recording.
You can also watch a recorded service during
record. Press the Navigation-Button up or down to
bring up the Servicelist. Press the TEXT-Button to
show all recorded movies. Select a movie by
pressing the OK-Button. The recording proceeds in
the Background.
Remember allways to activate the PVR-Mode
before controlling a recording or play of a service by
pressing the VIDEO-Button.
Press the TV-Button to stop recording.