Dream Property DM7000 - Manual (Page 6)

- 6 -
4. Description Rear view
4.1. Mainspower 230V / 50Hz
Plug in the Power cord into the Mainspower socket. The Powerplug remains only in its recommened
sockets 230V / 50Hz.
4.2. TV Scart
Connect your TV with an appropiate Scartcable to your Dreambox.
4.3. VCR Scart
Connect your VCR with an appropiate Scartcable to your Dreambox. Remember, the VCR Scart is
not designed to record a Videosignal from the VCR.
4.4. HiFi-Amplifier
Connect your HiFi-Amplifier either to the analogue audio R/L (RCA/Cinch) or digital audio (Toslink)
socket.
4.5. Analogue Audio (Cinch)
Connect your Dreambox with an appropiate RCA/Cinch cable to your HiFi-Amplifier (e.g. AUX or Tape
socket).
4.6. Digital Audio (Toslink)
Connect your Dreambox with an appropiate optical (Toslink) cable to your HiFi-Amplifier or DSP. The
Dreambox provides sample rates from 16, 22.05, 24, 32, 44.1, 48 kHz. The AC3 signal is also
available at this socket, if the selected channel transmits Dolby Digital signals.
4.7. Communication Port (Ethernet 10/100MBit, RJ45)
The Communication Port is an Ethernet socket. Used to communicate with the Dreambox via HTTP,
FTP, NFS, Telnet und Samba to access your recorded movies or to upload channel lists. This socket
is also mentioned to update the Operation system. Please connect an appropiate patchcable.
See passage DreamUp - Software upgrade.
4.8. Mini DIN
The Mini DIN Port is mentioned for external I2C Rotorsignals and provides Signals for external IR
Devices.
4.9. USB Port
The USB Port is designed for USB 1.2 compatible Devices. The amount of provided USB devices
depends on the installed image (Software) and is still under Development.
4.10. Serial Port (RS232C, Sub-D, 9-pin)
The Serial Port is mentioned to update the Operation system. Please connect a serial nullmodem
cable here. See passage DreamUp - Software upgrade.
4.11. LNB In
Connect the coaxial cable from your LNB here. Please switch the power off from the the Dreambox
first.
4.12. LNB Out
Connect an analogue receiver here. Remember to shutdown your Dreambox into Deep-Standby-
Mode, if you wish to view analogue TV.