Dream Property DM820 HD - Manual (Page 42)

5.2 Management
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons ( ) choose the option “Setup” and press the OK-Button.
3. With the Navigation-Buttons ( ) choose the option “System” and press the OK-Button.
4. With the Navigation-Buttons ( ) choose the option “Storage devices” and press the OK-Button.
5. By pressing the blue Options-Button you enter the “Harddisk setup”.
You now can set the duration of time after which the harddisk will be put into standby-mode. You can
select from:
• No standby
• 10 or 30 Seconds
• 1, 2, 5, 10, 20 or 30 Minutes
• 1, 2 or 4 Hours
Once you have selected the desired time press the OK-Button or the green Options-Button to get back
into the harddisk menu.
5.2.1 Initialization
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons ( ) choose the option “Setup” and press the OK-Button.
3. With the Navigation-Buttons ( ) choose the option “System” and press the OK-Button.
4. With the Navigation-Buttons ( ) choose the option “Storage devices” and press the OK-Button.
5. With the Navigation-Buttons ( ) choose your harddisk. If you have installed another hard disk
this option will differ from the one depicted!
6. By pressing the red Options-Button you will initialize (format) the hard disk. After you confirm
the safety question the initialization process starts.
!!! WARNING !!! All data stored on the HDD will be lost.
5.3 Recording
5.3.1 Instant recording
Press the Record-Button.
You have five available options.
37