2 stop recording, 3 recording by timer – Dream Property DM820 HD User Manual
Page 43
1. Add recording (indefinitely)
2. Add recording (stop after current event)
3. Add recording (enter recording duration)
4. Add recording (enter recording endtime)
5. Don’t record
Use the up/down-Buttons to navigate to your desired selection and press the OK-Button to select.
A ongoing recording is indicated by a flashing symbol in the Infobar (see Chapter
Infobar
on page
During a recording you can watch another service, view a previously recorded movie or add an additional
recording.
The number of simultaneous recordings depends on the configuration of the installed tuner and on the
number of services residing on a transponder. It is possible to make up to four simultaneous recordings.
Pressing the Up/Down-Buttons on your remote control activates the service list. The recording continues
in the background. Once a recording is started, no matter if manually or by timer (see Chapter
Recording by timer
on page
) it will be signaled by a note on the screen.
Is the tuner used for recording and you are trying to access a service that is not on one of the recorded
transponders you will get the “No free tuner” message.
5.3.2 Stop recording
Switch to the service which recording you want to stop.
1. Press the Record-Button.
2. With the Navigation-Buttons (
) choose the option “Stop recording” and press the OK-Button.
If you have only one active recording it will be stopped immediately. If more than one recording is active
you will given the choice which recording you want to stop.
5.3.3 Recording by timer
With the help of a timer you can record shows to your hard disk (if you have a hard disk installed). You
are offered two different ways to program a timer, the manual way or via the EPG.
Manual programming
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons (
) choose the option “Timer” and press the OK-Button.
3. Press the green Options-Button to add a new timer.
You can choose between two different timer types. “Record” to record the desired show or “Zap” to
automatically switch to the service.
38