Dream Property DM820 HD - Manual (Page 53)

controlled by HDMI If the connected HDMI device supports the format AC3+, the AC3+ signal will
be forwarded without altering it, otherwise the AC3+ stream will be converted to a AC3 stream.
OSD visibility With the Navigation-Buttons ( ) you can change the transparency of the gui.
Scaler sharpness With the Navigation-Buttons ( ) you can change the sharpness of the screen.
6.5 OLED-Display
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons ( ) choose the option “Setup” and press the OK-Button.
3. With the Navigation-Buttons ( ) choose the option “System” and press the OK-Button.
4. With the Navigation-Buttons ( ) choose the option “Display Setup” and press the OK-Button.
Now you can set the brightness of the OLED-display for standby and operation mode.
Operation
1. With the Navigation-Buttons ( ) choose the option “Operation”.
2. With the Navigation-Buttons ( ) choose the brightness of the OLED-Display for operation mode.
Idle Mode
1. With the Navigation-Buttons ( ) choose the option “Idle Mode”.
2. With the Navigation-Buttons ( ) choose the brightness of the OLED-Display for idle mode.
6.6 Network
6.6.1 Connection via network cable
Adapter-Settings
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons ( ) choose the option “Setup” and press the OK-Button.
3. With the Navigation-Buttons ( ) choose the option “Network” and press the OK-Button.
4. With the Navigation-Buttons ( ) choose the option “Network Setup” and press the OK-Button.
5. Use the Navigation-Buttons and the Numeric-Keypad to change the settings.
Wired This option toggles the integrated ethernet interface on and off.
48