2 rear view – Dream Property DM800 HD se User Manual

Page 10

Advertising
background image

1.3.2 Rear view

Scart TV

Digital

Audio

Ethernet

USB

Modem

DC 12V

SERVICE

HDMI

Power on/off

eSATA

13/18V= / LNB IN

Network interface

S/PDIF optical audio

Power connector

Scart TV output

Power switch

2 USB 2.0 ports

Modem connector

eSATA port

HDMI output

LNB input

Service connector

LNB input

Connect the coaxial cable from your LNB here.

Service connector

The Service port is used to update the operating system. Please connect a mini-usb-to-

usb-cable here.

eSATA connector

You can connect an external SATA Hard disk.

HDMI output

You can connect a TV to the HDMI out of your Dreambox if your TV has the right input.

Power switch

The main power switch shuts off power from your Dreambox.

!!! IMPORTANT !!!

Before opening the device, always pull the power plug!

Scart TV output

Connect your TV, projector or beamer to your Dreambox using a Scart cable.

Network interface

The Communication Port is an Ethernet port. It is used to communicate with your

Dreambox via HTTP, FTP, NFS, Telnet, SSH and Samba to access your recorded movies, to upload
channel lists, etc. This port is also used to update the operating system of your Dreambox. Please
use a regular patch cable to connect your Dreambox to your LAN.

S/PDIF optical audio

You can connect your Dreambox with an optical (Toslink) cable to your HiFi-

Amplifier or DSP. The AC3 signal is also available at this port in case the selected channel transmits
Dolby Digital signals.

Modem connector

You can optionally connect your Dreambox to your ISP via the Modem Socket using a

phone line.

2 x USB 2.0 port

The USB 2.0 Port is designed for devices that support the USB 2.0 standard. The amount

of supported USB devices depends on the installed image (Software) and is still under development.

Power supply connector

Plug the power cable of the power supply that came with your Dreambox into

power outlet. Connect your power supply to your Dreambox. You must not connect the power plug
of the power supply to anything other than a socket that supplies 230V/50Hz.

5

Advertising