Dream Property DM800 HD se - Manual (Page 72)

9.3 Updating a new software
9.3.1 using the DreamUP program
How do I install new software on my Dreambox DM800 HD se ?
Requirements:
• PC with Windows operating system
• DreamUP software (current version under
http://www.dreambox.de
)
• 1 mini-usb-to-usb cable
• 1 network cable (optional but recommended)
1. Firstly disconnect your Dreambox from main power.
2. Connect the mini-USB-connector of the “mini-USB-to-
USB-cable” to the service-port of your dreambox and the
usb-connector to your computer.
3. Your computer recognizes the dreambox as new hard-
ware and will ask for a suitable driver. The driver can
be downloaded on our website (download-section) under
http://www.dreambox.de
Now install the driver.
4. Open the windows device manager. In Windows XP
(i.e.)you can find it this way: Click on Start, Settings,
Control Panel, System, Hardware, Device Manager.
5. Click on “Ports (COM & LPT)” and look for the en-
try “CP210x USB to UART Bridge Controller”. Please
notice which Com-Port is given on this entry, in this ex-
ample: “(COM4)”.
67