Dream Property DM800 HD se - Manual (Page 73)

6. Start the DreamUp software on your PC.
7. Select the com-port which the “mini-USB-to-USB-cable”
is connected to, as described above. In our example
“COM4”
.
8. Check the “Use network” box if your PC and Dreambox
are connected using a network cable
The software update can be done without network sup-
port, but it takes at least 30 minutes.
9. Enter your PC’s IP under “Local-IP (PC)” you’re your
Dreambox’s IP under “Foreign-IP (Box)”.
10. Click on the “Connect” button and reconnect your
Dreambox to main power.
11. The flash loader will now be transferred to your Dream-
box.
68