4 automatic scan – Dream Property DM800 HD se User Manual
Page 65
2. With the Navigation-Buttons (
) choose the option “Setup” and press the OK-Button.
3. With the Navigation-Buttons (
) choose the option “Service searching” and press the OK-
Button
.
4. With the Navigation-Buttons (
) choose the option “Tuner configuration” and press the OK-
Button
.
5. With the Navigation-Buttons (
) choose the “DVB-T Tuner” and press the OK-Button.
6. With the Navigation-Buttons (
) choose your region.
7. If you have connected an active antenna and you want to run the antenna without it’s original power
supply set the “Enable 5V for active antenna” option to “On”.
8. Press the OK-Button to save this settings.
7.4 Automatic scan
Follow this steps:
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons (
) choose the option “Setup” and press the OK-Button.
3. With the Navigation-Buttons (
) choose the option “Service searching” and press the OK-
Button
.
4. With the Navigation-Buttons (
) choose the option “Automatic scan” and press the OK-Button.
5. Set all tuners with which you want to search to “yes”. Use the Navigation-Buttons (
) choose
the tuner and the Navigation-Buttons (
) to switch to “yes”.
6. Press the OK-Button to start the scan.
Automatic scan
60