Unpacking and assembly, Install the depth regulator lever, Fill engine crankcase – EarthQuake 3200 User Manual

Page 10

Advertising
background image

10

ARDISAM

UNPACKING AND ASSEMBLY

INSTALL THE DEPTH REGULATOR
LEVER

1. Install the depth regulator lever through hole in bracket

from the bottom up with curve to rear of unit and
secure with detent pin.

FILL ENGINE CRANKCASE

1. Add oil according to engine manual. Do not overfill.

Use a clean, high quality detergent oil. Container must
be marked A.P.I. Service SF - SJ. Use no special
additives with recommended oils. Do not mix oil with
gasoline.
Oil level must be full. Check the oil level by
removing the oil fill plug. Oil level should be up to the
bottom of the fill plug opening.

2. Always check oil level before starting engine. Refer to

engine manual for capacity and type of oil to use.

depth

regulator

lever

detent pin

Engine is shipped from factory without oil. You
must add engine oil before starting engine.

Advertising