Eurocom D270ES VIPER - Manual (Page 74)

Advanced Controls
Display Options 3 - 11
3
Switching/Enabling Displays (Driver)
With the video driver installed (see “What to Install” on page 4 - 2 ), you
can use its built-in controls to switch between the displays as follows:
1. Plug the VGA monitor or TV into the appropriate port.
2. Following the instructions in
“SiS Utility Tray/Manager” on page 3 -
5 , and choose Driver Mode Setting.
3. If the device list box doesn’t show any plugged in devices, uncheck
the Auto option.
See the following pages for instructions on enabling Mirror and Multi-
monitor modes.
Figure 3 - 6
Disable Auto