Eurocom D270ES VIPER - Manual (Page 79)

Advanced Controls
3 - 16 TV Display
3
TV Display
To display desktop images on a TV display, connect the TV to your com-
puter by using an S-Video cable from the TV to the port at the rear of the
computer. Follow the instructions in
“Switching/Enabling Displays
(Driver)” on page 3 - 11 to switch to a TV display
.

VGA Monitor and TV
Display Setting
If you intend to use a
TV and VGA monitor
as your display devic-
es, the TV must be set
as the primary
Display_1, and the
VGA monitor as the
secondary Display_2
(see
Figure 3 - 10 ).
Figure 3 - 10
VGA Monitor and
TV Display