Eurocom D270ES VIPER - Manual (Page 75)

Advanced Controls
3 - 12 Display Options
3
Mirror Mode
In this mode the display of the two devices is the same. Mirror mode simply
shows an exact copy of the Primary display desktop on the Secondary dis-
play. This mode will drive multiple displays with the same content. Use this
feature to display the screen through a projector for a presentation etc.
Setting Mirror Mode
1. Follow the instructions in
“Switching/Enabling Displays (Driver)”
on page 3 - 11 (make sure Auto is unchecked).
2. Choose the Mirror option from the Driver mode drop box.
3. Choose a device to be Primary, and one to be Secondary.
4. Click OK > OK to apply the settings (you may need to give your VGA
monitor a few seconds to refresh).
5. Click Yes to keep the settings.

Switching Display
Modes
To switch back from
Multimonitor mode to
either Mirror or Single
Mode, you will be re-
quired to restart the
computer.