EXFO AXS-200 SharpTESTER - Manual (Page 42)

Maintenance
34 AXS-200
Replacing the Battery
Replacing the Battery
As soon as you remove the battery compartment door, the unit will turn
itself off.
Note: Batteries for the AXS-200 modules are custom-made and replacement
batteries must be ordered directly from EXFO.
Note: The following procedure is a guideline for changing the battery in your
module. Your model may differ slightly depending on the module, but the
instructions are basically the same.
The table below indicates the battery ratings for your unit.
W
ARNING
Do not throw the battery into fire or water and do not short-circuit
the battery’s electrical contact. Do not disassemble.
Battery Model Power
Xwoda, XW-EX001
Lithium-ion rechargeable battery
10.8 V
2.4 A/h