EXFO AXS-200 SharpTESTER - Manual (Page 50)

Maintenance
42 AXS-200
Managing Software Installations
5. Use the arrow buttons to select the Create Installation File button,
then press .
6. If desired, you can copy the installation file you have just created to a
USB drive as follows:
6a. Connect a USB memory drive to your unit.
6b. From File Manager, copy the installation file. For more
information, see Copying or Deleting Files and Folders on page 24.
Installing Software Installation Files
Once the files are created, you can recall them at any time. You can use the
files that are stored on your unit or that are available on a USB memory
drive.
To install a software installation file:
1. If you want to retrieve the installation file from a USB memory drive,
connect it to your unit.
2. Press , select System, then
Software Installation.
3. Select the Installation tab.
4. Press in the drop-down list to
select which file to install. The
installation files that are available
on your USB memory drive will be
listed as well.
5. Use the arrow buttons to select the Install button, then press .