Led statuses, Battery led status – EXFO AXS-200 SharpTESTER User Manual
Page 56
Troubleshooting
48
AXS-200
LED Statuses
LED Statuses
The power and battery LEDs are used to indicate specific statuses of your
unit. If you notice that one of the LEDS displays a particular status, look in
the tables below to see what could be causing it.
Battery LED Status
The battery status LED is
red.
³
Battery door is open.
³
Battery is defective.
³
Close the battery door
completely.
³
Contact EXFO or replace
the battery.
The unit is not responding.
Shut down the unit by
pressing and holding it
down.
You will hear a first beep;
release the key after you hear
a second beep.
Turn the unit on again to reset
it.
Battery LED
Status
DC In
Unit
Battery
Door
Battery
Battery
Status
Battery Level
Green
Plugged
-
Closed
Present
OK
Full
Green,
blinking
Plugged
-
Closed
Present
OK
Not full / Low
/ Empty
Green,
blinking
Plugged
Off
Open
Present
OK
Not full / Low
/ Empty
Yellow,
blinking
Unplugged On
Closed
Present
OK
Low
Problem
Possible Cause
Solution