EXFO FOT-930 Multifunction Loss Tester - Manual (Page 39)

Measuring Power or Loss
Multifunction Loss Tester 31
Defining the List of Favorite Wavelengths
To customize the list of favorite and selected wavelengths:
1. Press Menu, then select Setup >
Power Meter.
OR
From the Power Meter pane, press Setup
(F1/F2 key).
2. Using the up/down arrows, scroll through the
list.
3. Press Enter to select/deselect the highlighted wavelength. An X
appears beside selected wavelengths.
4. If a wavelength does not appear on the list, you can add it by pressing
Add Wavelength (F1/F2 key). You can also remove a wavelength from
the list by pressing Remove Wavelength (F1/F2 key).
5. Repeat these steps for other wavelengths as necessary.
To revert to the factory-default list:
1. Press Menu, then select Setup > Power Meter.
OR
From the Power Meter pane, press Setup (F1/F2 key).
2. Press Factory Settings (F1/F2 key).