EXFO FOT-930 Multifunction Loss Tester - Manual (Page 64)

Managing Test Results
56 FOT-930
Checking Available Memory
Checking Available Memory
You can save up to 1024 results in the unit memory.
To view the available memory on your unit:
Press Menu, then select Results/Information > Unit Info.
Transferring Test Results to a Computer
Using an appropriate serial cable and the Handheld Data Transfer software,
you can transfer results from your handheld unit to a computer or FTB-500.
This way, you can increase storage capacity, perform better analyses on
test results and create reports.
To transfer test results to a computer:
1. Using the serial cable, connect your unit to an available COM port of
the computer.
Note: If your computer is not equipped with an RS-232 port, you can use a USB
adapter. After installing the proper drivers, your computer should associate
the adapter to an available COM port.
I
MPORTANT
Transferred files are not automatically deleted from your unit.
Serial port
(male DB9)
RS-232
connector