EXFO FTB-5230S Optical Spectrum Analyzer for FTB 200 v2 - Manual (Page 513)

Referencia de instrucciones SCPI
OSA 507
Product-Specific Commands—Description
:CALCulate[1..n][:WDM]:DATA:CHANnel:
NSELect
Description This command sets the one-based index of the
selected WDM channel result.
At *RST, this value is not available.
Syntax :CALCulate[1..n][:WDM]:DATA:CHANnel:NSELec
t<wsp><Select>|MAXimum|MINimum
Parameter(s) Select:
The program data syntax for <Select> is defined
as a <numeric_value> element. The <Select>
special forms MINimum and MAXimum are
accepted on input.