EXFO FTB-7000 OTDR Series for FTB-500 - Manual (Page 139)

Customizing the Application
OTDR 125
Defining OTDR Setups
Defining OTDR Setups
Once you have established all your configuration parameters, you may
choose to save your setup for future use. You can also modify existing
OTDR setups or delete them as needed.
Note: To speed up the OTDR setup definition, you can use an already existing
setup, make the changes you need and save it under a new name (see the
procedure on page 126).
To save an OTDR setup:
1. Make sure you have established all your parameters first (by entering
the required data in all tabs of the Setup dialog box).
2. From the main window, press Setup.
3. From the Setup dialog box, select the General tab.
4. In the Configure OTDR Using list, ensure that Current Setup is
selected.
5. Press Save.
The OTDR dialog box opens.
6. Enter the file name in the box, and press OK.
The setup is now added to the Saved Setup list.