EXFO FTB-7000 OTDR Series for FTB-500 - Manual (Page 407)

SCPI Command Reference
OTDR 393
Product-Specific Commands—Description
:CONFigure[1..n]:ANAlysis:THReshold:
SLOSs
Description This command sets the splice loss threshold that
will be used for the next acquisition.
*RST returns this setting to default value.
Syntax :CONFigure[1..n]:ANAlysis:THReshold:SLOSs<w
sp><Splice
Loss>|MAXimum|MINimum|DEFault
Parameter(s) Splice Loss:
The program data syntax for <Splice Loss> is
defined as a <numeric_value> element. The
<Splice Loss> special forms MINimum,
MAXimum and DEFault are accepted on input.
MINimum allows to set the instrument to the
smallest supported value.
MAXimum allows to set the instrument to the
greatest supported value.
DEFault allows the instrument to select a value
for the <Splice Loss> parameter.
Sets the splice loss threshold.
Example(s) CONF:ANA:THR:SLOS? Ex.: Returns 0.02
CONF:ANA:THR:SLOS 0.03
CONF:ANA:THR:SLOS? Returns 0.03