EXFO FTB-7000 OTDR Series for FTB-500 - Manual (Page 150)

Analyzing Traces and Events
136 OTDR
Viewing Test Results
Viewing Test Results
The application allows you to view current results directly after an
acquisition sequence or to reload data from existing files.
To view test results:
From the main window, select the Result tab.
Note: The Result tab displays the results of pass/fail tests performed at the time
of trace acquisitions. Therefore, it will not be updated if you modify existing
traces later.
To view the graph corresponding to a listed trace:
1. From the Result tab, select the desired trace and press the Set as
Current Trace button.
Note: Since a trace cannot be both a reference and a main (current) trace at the
same time, the Set as Current Trace button will remain unavailable if you
select the reference trace from the list.
2. Select the Graph tab.
Event pass/fail status
Maximum splice loss in dB
Fiber
identification
Test
wavelength
Average splice loss in dB
Fiber length expressed
in the defined unit
Scroll arrows