EXFO MaxTester MAX-610 - Manual (Page 116)

Multimeter Tests
108 MAX-610
Resistive Balance

Threshold Settings button opens a new page that allows you to set the
resistive balance thresholds.

Test Status displays the current state of measurement or an error
message.
To select the parameter values:
1. Press the up/down arrow keys to highlight the desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press on a value to open a list box of options.
4. Press to confirm the value.
Resistive Balance Threshold Settings
The Threshold Settings page allows you to set the
Threshold Resistive Balance values for the test, in
Ω and %.

Type is the threshold limit for each pair: either
Maximum or Minimum.

Enabled is a flag to use the current threshold:
either Yes or No.
To set threshold values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4. Press to confirm the value.