EXFO MaxTester MAX-610 - Manual (Page 128)

Multimeter Tests
120 MAX-610
Station Ground
Threshold Settings
The Test Thresholds page allows you to set the
threshold values for the Ground Resistance.

Type is the threshold limit: either Maximum or
Minimum.

Enabled is a flag to use the current threshold:
either Yes or No.
To set threshold values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and select
the options.
OR
3. Press on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4. Press to confirm the value.
Result Details
The Result Details read-only page displays the
Station Ground results and the pass/fail status.

Test Group is the overall test group of the
selected saved results file, for example
Multimeter.

Test Identification is the test type of the group, for
example Station Ground.

Test Modes identifies the manner in which the
test was run, for example Snapshot.