EXFO MaxTester MAX-610 - Manual (Page 27)

Setting Up the MaxTester MAX-610
MaxTester Copper Test 19
Display and Language
Display and Language
To fit your environment, you may adjust the LCD
brightness, display the time and Active Sync, and
change the display language. The values are kept in
memory when you turn the unit off.
Note: The LCD Backlight consumes battery power; more
brightness, more power consumption.
To adjust the display settings:
1. From ,
select System Settings, and then
Display and Language.
2. Use the up/down arrow keys to select the setting
to change.
3. Press to select it.

By using the up/down arrow keys, you can switch between preset
brightness levels in the Backlight item. Press
to confirm.

To display the time and Active Sync in the title bar, enable the item.
Press
after your selection to confirm.

Use the up/down arrow keys to navigate between the available
languages, then press
to select it. You will be prompted to
restart your unit.

To set which Home page the unit defaults to when pressing ,
highlight Start MaxTester using: and select from the list.