View b interface diagram, View b – FeiYu Tech FY-41AP User Manual
Page 10
GuiLin FeiYu Electronic Technology Co., Ltd. http://www.feiyudz.cn E-mail: [email protected]
Page 9
S7
：When use Remote Adaptor, this pin outputs RC receiver CH7 (refer
Remote Adaptor & Data Radio Manual)
S8：When use Remote Adaptor, this pin outputs RC receiver CH8 (refer
Remote Adaptor & Data Radio Manual)
B) The middle pins of View A are (+ve) power output to aircraft servos.
Important Note:
Power is supplied from the RC Receiver. The power
Pins in View A is not connected to the Power supply Pins of View B. Do not
short circuit the two sides.
C) The bottom pins (black colour) are for GND (-ve).
D) AS – Airspeed Sensor connection port. Please note signal, +ve and GND
arrangement.
VIEW B
Interface Diagram
a) GPS pins connection interface:
GND
VCC
GPS-TXD
GPS-RXD
GPS-TXD：Connect to GPS module RX port.
GPS-RXD：Connect to GPS module TX port.
VCC：+5V output port.
GND：GND output port.