FeiYu Tech FY-41AP - Manual (Page 16)

GuiLin FeiYu Electronic Technology Co., Ltd. http://www.feiyudz.cn E-mail: [email protected]
Page 15
d) NOTE: The Power Manager is NOT rated to supply power to the airplane
servos. To power the servos, use your ESC BEC connected via VIEW A
interface of the FY41AP. We highly recommend to use a +5v to +6v
External BEC (rated for 3A output) plugged through VIEW A interface.
Remember to remove the red wire from your ESC plug if you use an External
BEC
.
e) For Gas or Nitro powered planes, you will require a +5 volt battery
plugged into the RC Receiver. The connecting wire will send +5v power to
the FY41AP (
Warning : remove the +5v wire from the Power Manager plug
if you use battery power).