Errors – Go Power! GP-PWM-30 User Manual

Page 14

Advertising
background image

Solar Controller

GP-PWM-30

______________________________________________________________________

14

© 2012 Carmanah Technologies Corporation

September 2012



Errors



Over Voltage


If the GP-PWM-30 experiences
a battery over voltage (15.5V),
the controller will stop operating
and the display will begin to
flash. The controller will resume
operating when the error is
cleared.


Icons Displayed: Battery, Volt Symbol, Lightning Bolt



Low Voltage


If the GP-PWM-30 experiences
the battery state of charge
reaching zero, a lightning bolt
symbol will begin to flash in the
lower right corner of the display.
The controller will continue
operating. The controller will
only stop operating if the

voltage drops below 6 volts.


Icons Displayed: Battery, Percent Symbol, Lightning Bolt

Advertising