GoDEX RT700iW series - Manual (Page 55)

5
Accessories
5.2 Installing the Label Dispenser
51
The Overview of the Label Dispenser
* *** A label liner thickness of 0.006 mm ± 10% and a weight of 65 g/m 2 ± 6% are recommended.
** ** The label dispenser will take labels up to a max. width of 118 mm.
*** * When using the label dispenser, set the stop position (printer command ^E) to 13.
Preparation Steps
Please see the Section 5.1 Preparation Steps to complete the preparation steps before installing the label dispenser.
Installing the Label Dispenser
1. Removed the front panel.
2. Press the catches on the left and right sides of the platen downwards and then pass the connection cable
through the slot of the printer.
PAPER SENSOR
PAPER FEED ROLLER
COVER
CONNECTION CABLE OF
LABEL DISPENSER
SLOT