GoDEX RT700iW series - Manual (Page 64)

60
5
Accessories
044
2. Close the top cover. To finish, press the feed button to set the label position.
* *** We advise against using inside wound label stock.
** ** Labels should be at least 30 mm high. When using the printer with the cutter, you should set the stop position
(^E) to 30.
Installing the Label Roll Module on the Printer
1. Pass the labels through the guides and the cutter.
Through the label guides
Through the cutter
RT700i
Press the feed key
Close the top cover
Push
1
RELEASE CATCH
Release catch for closing
the printer cover
2