GoDEX RT860i - Manual (Page 55)

51
5
Accessories
2. Place label dispenser to align both holes of screw and then tighten the screws. (Screw holes on the front side
of the bottom barcode Printer)
3. Place the platen back to the printer and lock the clips.
4. Close the printer cover and printing mechanism.
Then to turn the printer upside down.
Lock the clip
CLIP
Close the printer cover
2
Push
1
RELEASE CATCH
Release catch for closing
the printer cover
Open the front
cover
1
2
Tighten the screw
2
Screw Hole