GoDEX RT860i User Manual
Page 64
60
6
Maintenance and Adjustment
6.1 Cleaning the Print Head
Dirt on the print head or ribbon may result in inadequate print quality (there are only partial images on the label).
The printer cover should therefore be kept closed when possible. Keeping dirt and dust away from the paper or
labels ensures a good print quality and a longer lifespan of the print head.
Cleaning Steps
1. Switch off the printer.
2. Open the printer cover.
3. Remove the ribbon.
4. To remove any label residue or other dirt from the print head
(see Red arrow), please use a soft lint-free cloth dipped in alcohol to wipe.
*
***
Weekly to clean the print head one time. (Recommended)
**
**
When cleaning the print head, please note that if there is attached to metal or hard on soft cloth, if using a dirty
soft cloth made printer head damage is not covered under warranty conditions.
PRINT HEAD
To clean the print head