GoDEX EZDT4 - Manual (Page 25)

9. Install the Ethernet Back Panel to the
printer.
10.
al
11.
screws.
Push the mainboard back to origin
position.
Tighten the hexagonal
12. Align the Ethernet module to the Ethernet
port and plug into it.
3. Tighten the secure screw to fix Ethernet 1
module onto the main board.
14. Connect one end of Module Connection
Wire to the main board and the other end
to the Ethernet module.
15. Put the middle compartment bac k and
assemble it with bottom compartment of
the printer.
16. Install the Front Cover Plate.
17. Tighten bottom case screws to complete
No
p
XS THERNET,1" printer command to
rinter for activating the Ethernet connection
function. Please mind that USB port will be
deactivated once the Ethernet connection
function is activated.
the installation.
te 】 【
After the Ethernet module installation is
com leted, please send the
ET,USBE "^
p
EZ-DT-2/EZ-DT-4 User’s Manual
24