GoDEX EZDT4 - Manual (Page 28)

4-5. Error Messages
LED Light Beep Description Solution
Red
(Flash)
None Print head temperature high.
Wait for the print head
temperature drops to the normal
temperature range, printer will
go back to the standby mode
ED light will stop and the L
flashing.
Unable to detect paper.
ovable sensor
mark is at the correct position, if
the sensor is still unable to
paper, and then go
ensing again.
Make sure the m
detect
through Auto S
Red
Paper used up. label roll. Replace with new
Red Abnormal paper feed.
rd tags or
behind the
label
k mark
adjust
l usage.
2 beeps twice
Possible causes: ca
paper fall into the gap
d platen roller, can’t fin
c gap/black mark, bla
paper out. Please
according to actua
Red
mory is full; printer w
out “Memory full.”
e unnecessary data in the
2 beeps twice
Me ill print Delet
memory.
Red 2 beeps twice
Can’t find the file; printe
out “Filename can not be found.”
out
les, then check whether
the file exist and the names are
correct.
r will print
Use “~X
all the fi 4” command to print
Red 2 beeps twice
File name is repeated; printer will
print out “Filename is repeated.” Change the file name and
download again.
2 beeps twice
EZ-DT-2/EZ-DT-4 User’s Manual
27