GoDEX GS220 - Manual (Page 11)

2–4
³ 1 1 5 4 1 3
Enable Alternate Code 39 Reference
Comparison Check
– assists with elements that
are below the 2 to 1 (wide to narrow) element
width requirement.
³ 1 1 5 4 0 3
* Normal Code 39 Reference Comparison
Check
2
OF
5 C
ODES
³ 1 0 0 1 1 5
* Enable Interleaved 2 of 5 (ITF)
³ 1 0 0 1 0 5
Disable Interleaved 2 of 5 (ITF)
³ 1 0 0 3 1 0
Enable MOD 10 Check on ITF
– The scanner
will only scan Interleaved 2 of 5 (ITF) bar codes
that have a Modulo 10 check digit.
³ 1 0 0 3 0 0
* Disable MOD 10 Check on ITF
³ 1 0 7 8 1 7
Allow ITF Null Characters
³ 1 0 7 8 0 7
* Do Not Allow ITF Null Characters
³ 9 0 1 6 0 0
~ ITF Symbol Length Lock 1 –
To specify a first
ITF symbol length lock, scan this bar code and
the appropriate code byte sequence located
on page 1 2–1.
³ 9 0 1 7 0 0
~ ITF Symbol Length Lock 2
– To specify a second
ITF symbol length lock, scan this bar code and the
appropriate code byte sequence located
on page 1
2–1.
³ 9 0 3 4 0 0
~ ITF Minimum Symbol Length
– To specify a
minimum number of ITF characters to be decoded,
scan the appropriate code byte sequence located
on page 1
2–1.