Ignore bel command, Disable light pen toggle during beep, Enable pass-through – GoDEX GS220 User Manual
Page 34: Disable pass-through, Beep with pass-through data, No beep with pass-through data, Enable record count capture, No record count capture, Transmit record counts
Advertising
6–5
³
1
1
8
4
1
7
Beep on BEL Command
– The scanner beeps
when it receives a BEL character from the host. If
a number is sent within 200 msecs before the
BEL character, the scanner will beep that
number of times.
³
1
1
8
4
0
7
* Ignore BEL Command
³
1
1
6
9
1
3
Enable Light Pen Toggle During Beep
–
The scanner beeps and toggles the light pen
data line on a successful decode. This drives a
good read indicator.
³
1
1
6
9
0
3
* Disable Light Pen Toggle During Beep
³
1
2
4
7
1
1
Enable Pass-Through
³
1
2
4
7
0
1
Disable Pass-Through
³
1
2
5
0
1
1
Beep with Pass-Through Data
³
1
2
5
0
0
1
* No Beep with Pass-Through Data
³
1
2
5
0
1
0
Enable Record Count Capture
³
1
2
5
0
0
0
* No Record Count Capture
³
9
9
8
0
5
2
Transmit Record Counts
Advertising