Denon AVR-4806CI - Manual (Page 56)

56
Basic Operation
Dolby Pro Logic II x (Pro Logic II ) mode
• To play in the PL II x mode, set “Sp.Back” at the Speaker
Configuration setting to “1spkr” or “2spkrs”.
• To play in the PL II x mode, set “Surround Back” at the Power
Amp Assign setting.
• This mode is optimal for playing program sources recorded
in Dolby Surround.
1
Press the STANDARD button to select “Dolby
Pro Logic IIx” mode.
• The Dolby Pro Logic indicator
lights.
The mode switches as shown
below each time the STANDARD
button is pressed.
lights
DTS NEO:6 DOLBY PL II x
3 Press the SURROUND PARAMETER button.
• Display the “Surround Parameter” menu.
2 Play a program source .
For operating instructions, refer to the manuals of the
respective components.
4 Press the CURSOR F F or G G button to select the
play mode.
When the “SB CH OUT” parameter is set to “ON”.
(Set “SP.Back” at the System Setup to “1spkr” or
“2spkrs”).
Display
M O D E : P L x C
* S u r r P a r a m e t e r
M O D E : P L x M
* S u r r P a r a m e t e r
M O D E : P L x G
* S u r r P a r a m e t e r
(Pro Logic II x Cinema
mode)
(Pro Logic II x Music
mode)
(Pro Logic II x Game
mode)
When the “SB CH OUT” parameter is set to “OFF”.
(Set “SP.Back” at the System Setup to “None”).
Display
M O D E : P L C
* S u r r P a r a m e t e r
M O D E : P L M
* S u r r P a r a m e t e r
M O D E : P L G
* S u r r P a r a m e t e r
* S u r r P a r a m e t e r
M O D E : D O L B Y P L
(Pro Logic II Cinema
mode)
(Pro Logic II Music mode)
(Pro Logic II Game mode)
(Dolby Pro Logic mode)
SURROUND
PARAMETER STANDARD ENTER
CURSOR
CURSOR
SURROUND
PARAMETER
ENTER
STANDARD