Denon AVR-4806CI - Manual (Page 83)

Advanced Operation
83
Operating a component stored in the
preset memory
1 Press the MODE SELECTOR button for the
component you want to operate.
2 Operate the component.
For details, refer to the component’s operating
instructions.
Some models cannot be operated with this remote
control unit.
• For the DVD player remote control buttons, function names
may differ according to manufacturer. Compare with the
remote control operation of the various components.
NOTE:
• Depending on the model and year of manufacture, this
function cannot be used for some models, even if the
your device is listed on the included list of preset codes.
• Some manufacturers use more than one type of remote
control code. Refer to the included list of preset codes to
change the number and check it out.
¢ The preset codes are as follows upon shipment
from the factory and after resetting:
• TV, VCR .......................................HITACHI
• CD, DVD ......................................DENON
• SAT ..............................................RCA
DVD preset codes
41470 (default) 40490
DENON Model No.
DVD-555
DVD-755
DVD-900
DVD-910
DVD-955
DVD-1000
DVD-1200
DVD-1500
DVD-1710
DVD-1910
DVD-2200
DVD-2800
DVD-2800
II
DVD-2900
DVD-800
DVD-1600
DVD-2000
DVD-2500
DVD-3000
DVD-3300 DVD-2910
DVD-3800
DVD-3910
DVD-5900
DVD-5910
DVD-9000
DVM-715
DVM-1800
DVM-1805
DVM-1815
DVM-2815
DVM-4800
1. DVD player (DVD), DVD recorder (DVDR) system
buttons
SRC ON : Power on
SRC OFF : Power off
6 , 7 : Manual search (forward and reverse)
2 : Stop
1 : Play
8 , 9 : Auto search (to beginning of track)
3 : Pause
SETUP : Setup
MENU : Menu
• , ª, 0 0 , 1 1 : Cursor up, down, left and right
ENTER : Enter
DISP : Display
CH +, – : Switch channels +, –
0 ~ 9, +10 : Number
Default setting = DVD
The preset codes of a DVDR can be recorded in the DVD
mode so that the DVD recorder can be operated.
It is only possible to set the preset memory for either
the DVD or DVDR.