Hall Research SC-1080H - Manual (Page 12)

10
Model SC1080-H
3.4 Infra-Red Remote control (IR Remote)
1. Power: Power unit ON/OFF.
2. Input: Toggle through input sources.
3. HD: Select Component Input.
4. PC: Select PC input.
5. HDMI/DVI: Select HDMI Input.
6. Output Resolution: Select various output
resolutions directly. Others are available via the
OSD.
7. EXIT: Select to exit OSD menu
8. MENU: Select to show OSD
9. OK: Select to confirm a selection.
10. UP/DOWN/LEFT/RIGHT: Select to move in
OSD menu or to change a selection.
11. RESET: Press and hold for 5 seconds to
reset firmware to factory defaults.
12. AUTO ADJUST: Select to automatically
optimize picture centering on the screen.