Hall Research SC-1080H - Manual (Page 15)

Multi Input Digital Scaler with Audio
13
4.1 Read Commands
Command Response Description
R POWER > POWER ON SHOW POWER STATUS
R SOURCE > SOURCE CV~HDMI SHOW SOURCE STATUS
R OUTPUT > OUTPUT NATIVE~WUXGA SHOW OUTPUT STATUS
R SIZE > SIZE FULL or OVERSCAN or
UNDERSCAN or LETTERBOX or
PANSCAN SHOW SIZE STATUS
R PICTUREMODE > PICTUREMODE STANDARD or MOVIE
or VIVID or USER SHOW PICTURE MODE STATUS
(default = Standard)
R CONTRAST > CONTRAST 0~100 SHOW CONTRAST STATUS
(default=50)
R BRIGHTNESS > BRIGHTNESS 0~100 SHOW BRIGHTNESS
STATUS(default=53)
R HUE > HUE 0~100 SHOW HUE STATUS (default=50)
R SATURATION > SATURATION 0~100 SHOW SATURATION STATUS
(default=53)
R SHARPNESS > SHARPNESS 0~100 SHOW SHARPNESS STATUS
(default=48)
R NR > NR OFF or LOW or MIDDLE or HIGH SHOW NR STATUS
(default=OFF)
R PCHPOSITION > PCHPOSITION 0~100 SHOW PC H-POSITION STATUS
(default=50)
R PCVPOSITION > PCVPOSITION 0~100 SHOW PC V-POSITION STATUS
(default=100)
R PCCLOCK > PCCLOCK 0~100 SHOW PC COLOK STATUS
(default=2)
R PCPHASE > PCPHASE 0~63 SHOW PC PHASE STATUS
(default=61)
R COLORTEMP > COLORTEMP NORMAL or WARM or
COOL or USER SHOW COLOR TEMP STATUS
(default=Normal)
R RED > RED 0~100 SHOW COLOR TEMP RED STATUS
(default=47)
R GREEN > GREEN 0~100 SHOW COLOR TEMP GREEN
STATUS (default=47)
R BLUE > BLUE 0~100 SHOW COLOR TEMP BLUE STATUS
(default=47)
R OSDHPOSITION > OSDHPOSITION 0~100 SHOW OSD H-POSITION STATUS
(default=50)
R OSDVPOSITION > OSDVPOSITION 0~100 SHOW OSD V-POSITION STATUS
(default=50)
R OSDTIMEOUT > OSDTIMEOUT 0~100 SHOW OSD TIMEOUT STATUS
(default=10)
R OSDBACKGROUND > OSDBACKGROUND 0~8 SHOW OSD BACKGROUND STATUS
(default=5)
R AUDIOMUTE > AUDIOMUTE OFF or ON SHOW AUDIO MUTE STATUS
(default=OFF)
R AUDIODELAY > AUDIODELAY OFF or 1 to 150MS SHOW AUDIO DELAY STATUS
(default=OFF)
R MIRROR > MIRROR OFF or ON SHOW MIRRORING STATUS
R KEYLOCK > KEYLOCK OFF or ON SHOW FRONT PANEL LOCK STATUS
R RESET > RESET ON SHOWS RESET STATUS
An invalid command will respond with “R-[??]”<CR>