Hall Research SC-1080H - Manual (Page 8)

6
Model SC1080-H
2.2 Connecting the Scaled Output
The output of the SC1080-H can be connected to any HDMI™
compatible LCD, Projector, or Plasma display by using the appropriate
cable.
Figure 3 - Block Diagram
2.3 Other Connections
RS-232: Connect a serial control device to the 9-pin D-sub connector
labeled “RS-232”
Power: Use only the 5V 2.6A DC power input (center positive 2.1 mm
jack) supplied with the unit.