Hatteland Display HT C02HI (Compact Entry Level) - Manual (Page 19)

19
IND100210-18
General Installation Recommendations
Installation
PCI / PCIe Card removal / replacement - Introduction
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit before proceeding!
1: Unscrew 2 screws on each side of the bracket.
Use a Pozidriv #2 screwdriver.
2: Push each side of the bracket, one forward and one
backwards in a 45 degree rotation clockwise to slide it out
of the tracks. Then lift up the the bracket to remove it.
PCI / PCIe Card removal / replacement - Full Lenght & Full Height
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit before proceeding!
1: Unscrew 1 screw to loosen the chosen PCI / PCIe
card bracket from the cabinet as indicated.
Use a Pozidriv #2 screwdriver.
2: Remove or insert the desired PCI / PCIe card into the
slot. Make sure you do not force the card down, it
should be mounted with a firm grip with two hands and
performed in a straight up or downwards motion.
Repeat the procedure backwards to finalize operation.