Hatteland Display HT C02HI (Compact Entry Level) - Manual (Page 41)

41
IND100129-181
Note: All specifications are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version.
Entry Level Models
Specifications - HT C02HI STC-yzz-wzzz
SPECIFICATIONS
Note: All specifi cations are subject to change without prior notice!
Please visit www.hatteland-display.com for the latest electronic version.
2/2
• P69-MDDE128F = Matrox®P690 FP Graphics Card,PCIe x16,DVI-I,128MB,2048x1536* • i350T4BLK = Intel® Eth. I350-T4, 10/100/1000Mbps (4 x RJ45)
• P69-MDDE128LPF=Matrox®P690 LFP Graphics Card,PCIe x16,DVI-I,128MB,2048x1536* • PCA100294-1 = COM un-isolated RS-232 via DB9M, 4 channel*
• P69-MDDE256LAUF=Matrox®P690 Graphics Card,PCIe x16,DVI-I,256MB,2048x1536* • PCA100298-1 = LAN 10/100Mbps, 2 ports (RJ45)*
• M9140-E512LAF = Matrox®9140 Graphics Card,PCIe x16,DVI-I,512MB,2048x1536* • HT 00268 OPT-A1 = Digital IO Isolated, 4 IN + 4 OUT**
• CP114UL-I = 4 Ports COM Card, PCI, 1xDB44F to 4xDB9M isolated, RS-232/422/485) • HT 00254 OPT-A1 = CAN isolated, 2 channel**
• CP118U-I = 8 Ports COM Card PCI, 1xDB44F to 8xDB9M isolated, RS-232/422/485)*** • PCA100293-1 = COM RS-422/485 isolated NMEA 4 channel**
• VSD100897-1 = Audio 2W Amplified (1xDB9M+3x3.5mm Jack) Line-in,Line-Out,Mic** • VSD100896-1 = 2 x PS/2 5pin mini (Keyboard + Mouse inputs)**
• i350F2BLK = Intel® Ethernet Server Adapter I350-F2, FiberLAN (2 x LC Fiber Optic) • VSD100898-1 = Additional USB ports: 2 x USB3.0+2 x USB2.0**
• i350F4BLK = Intel® Ethernet Server Adapter I350-F4, FiberLAN (4 x LC Fiber Optic) • SX-118A = 1xParallel Port LPT, DB25F, Bi-Dir. ECP/EPP, PCIe card
• i350T2BLK = Intel® Ethernet Server Adp. I350-T2, 10/100/1000Mbps (2 x RJ45) • Variations of Storage, RAM Memory and Operating System
These products have been tested / type approved by the following classification societies: (* = pending)
IEC 60945 4th (EN 60945:2002)* IACS E10* EN61162* EU RO MR - Mutual Recognition (covers DNV, BV, ABS, GL, NK and LRS certificates)
• HT 00225 OPT-A1 = 2 x 26" ball bearing sliding rail & mounting kit for 19" Rack • HT 00273 OPT-A1 = 4 x Digital IN/OUT isolated, USB ext. module
• HT 00224 OPT-A1 = 2 x 20" ball bearing sliding rail & mounting kit for 19" Rack • HT 00262 OPT-A1 = 4 x RS-422/RS-485 isolated, USB ext. module
• HT 00223 OPT-A1 = 1 x 4U 19" Rack Case Kit(compatible with HT00224/00225) • HT 00263 OPT-A1 = 4 x RS-232 COM non-isolated, USB ext. module
• HT 00226 OPT-A1 = 2 x Mounting Bracket, 4mm SECC+Zinc Plating, RAL9011 • HT 00264 OPT-A1 = 1 x CAN isolated, 2 channel, USB ext. module
• JH C01MF A-A = 1 x USB Cable 1m, Type A-Chassis mount receptacle • HT 00274 OPT-A1 = 2 x LAN 10/100Mbps, RJ45, USB ext. module
• HT 00300 MSOS = OS options -> http://www.hatteland-display.com/os • HT 00275 OPT-A1 = 1 x PCI Mount Kit EN60945, Low Profile (LP, any len.)
• M153S30Q20-ACC0015 = 1 x Replacement Front Air Filter • HT 00229 OPT-A1 = 1 x PCI Mount Kit,Half Height to Full Height (any len.)
T E C H N I C A L D E S C R I P T I O N
A P P R O V A L S & C E R T I F I C A T E S
Available Accessories:
• W:345.00 [13.58''] x H:133.00 [5.24''] x D:390.00 [15.35''] mm [inch]
• Weight: 10 kg (approx)
• Power button, power led, reset button and HDD Led in front
• Easy Removable Front Air Filter (spare part accessory available)
• Includes Mounting Brackets (HT 00226 OPT-A1)
• 1 x Internal Cooling fan in front (120x120mm)
Power Supply Options: : Power Consumption - Operating: 70W typical (AC and DC models) External Connector Type:
• 115&230VAC - 50/60Hz : Model HT C02HI STC-xxx-Axxx (330W) STD IEC
• 24 VDC : Model HT C02HI STC-xxx-Dxxx (220W) - Pending Q2/2015 1 x 2p D-SUB (male) Amphenol FCC17
• Operating : Temperature -15 to +55°C - Humidity up to 95%
• Storage : Temperature -20 to +60°C - Humidity up to 95%
Compass Safe Distance: Standard: 140cm - Steering: 90cm
• Operating System Support : None, customized image or see table below.
• Storage Devices : 1 x 2.5" 1TB HDD SATA installed (2 x internal 2.5" HDD SATA possible)
• Processor : 1 x Intel® Core™ i3-4330 Dual Core 3.5GHz, Front Side Bus: 1600Mhz, 4MB Cache
• Memory/RAM : Max 32GB possible (Dual Channel DDR3 1600MHz 204pin SO-DIMM), see table below
• Graphics : Intel HD Graphics 4600 integrated 1 x DVI-I + 1 x DVI-D + 1 x DP
• Graphics Capabilities : Direct3D 11.1 w/Shader Model 5.0, OpenCL 1.2, OpenGL 4.2/3.3 (Linux). Max memory available for use: 1.7GB
• Max Graphics Resolution : Max 2560 x 1600 @ 60Hz for DVI-I/VGA, DVI-D and DP (DisplayPort)
• System Chipset : Intel® Q87
• BIOS : AMI BIOS
• PCI Slots : 1 x PCI v2.3, 32-bit/33MHz, 3V and 5V Interface, Full Height & Length
• PCIe Slots : 1 x PCI Express x16 + 1 x PCI Express x4 + 1 x PCI Express x1, all Full Height & Length
• Ethernet #1 : 2 x 10/100/1000Mbps, Intel® I217/I210 Gigabit LAN supports Intel® Teaming 2 x RJ-45
• Ethernet #2 : 2 x 10/100/1000Mbps, Realtek 8111E Gigabit LAN 2 x RJ-45
• Serial Port #1 : 1 x RS-232 Baud Rate: Max ~256Kbps 1 x DB9M
• Serial Port #2 : 1 x RS-422/RS-485 Baud Rate: Max ~256Kbps 1 x DB9M
• USB Ports #1 : 2 x USB2.0 (<5m) ports in front 2 x USB Type A
• USB Ports #2 : 1 x USB2.0 (<5m) + 1 x USB1.1 (<10m) / USB2.0 (<5m) ports in rear 2 x USB Type A
• USB Ports #3 : 2 x USB3.0 (<3m) ports in rear 2 x USB Type A
• PC-Speaker : Yes, onboard
• Audio : Realtek ALC892-CG HD Audio supports 5.1 channel (Note: for sound ouputs, hardware option VSD100897-1 is required)
• Power Manager : ACPI
• Watchdog Timer : Reset: 1 sec.~255 min. and 1 sec. or 1 min./step
• H/W Status Monitor : Temperatures, voltages & cooling fan status. Auto throttling control if CPU overheats
• Other Features : LAN Wakeup, USB Boot, Wakeup, Intel® Management Engine. True power on after power fail.
Physical Specifications: Environmental Considerations:
Lifetime Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
M E C H A N I C A L D E S C R I P T I O N
External Connector Type:
Factory Mounted Options:
Type Description Size/Speci cation
Memory DDR3 SO-DIMM 204-pin - Uses 2 slots, available sizes are 2GB, 4GB, 8GB, 16GB (when available) x 2
Storage 2.5" SSD SATA, Multi Level (MLC) - 80GB, 120GB, 300GB
Storage 2.5" HDD SATA - 1TB
Storage 2.5" HDD SATA Ruggedized/Automotive - 320GB (Shock 2ms: 300G - Vibration: 3/2.5/1G - Operating Temp: -30 to +85°C)
OS
Option
Embedded Enterprise (WEE): Microsoft® Windows® 7 Professional SP1 32/64bit, Microsoft® Windows® 7 Ultimate SP1 32/64bit, Microsoft®
Windows® Embedded 8.1 Industry Pro MultiLang 32/64bit, Microsoft® Windows® Server 2008R2 64bit, Microsoft® Windows® Server 2012 64bit,
Microsoft® Windows® Server 2012R2 64bit. Linux: openSUSE® 11.4, Fedora™ 15, Ubuntu® 10.04 LTS, Ubuntu® 12.04 LTS.
Notes Review "SSD Selection Guide" in manual. 32bit or 64bit versions available where applicable.
Available Computer Configurations:
Computer Specifications: (Entry model)
* If 1600x1200 resolution is used, DVI signals must be set to CVT-RB mode manually.
**For all Factory Mounted Options, review User Manual for possible HW combinations. *** Recommended Baud Rate: <57000b/s