Hatteland Display HT C02HI (Compact Entry Level) - Manual (Page 77)

Pinout Assignments
77
IND100241-18
Appendix
10+10 pin Isolated Digital Input/Output Module
Type Number “HT00268 OPT-A1”
Module A Module B
Module A Module B
A1 External Power + A1 IN+[0]
A2 N/C (Not Connected) A2 IN-[0]
B1 External Power - (GND1) B1 IN+[1]
B2 N/C (Not Connected) B2 IN-[1]
O1 HS[0] O1 N/C
C1 HS[1] C1 IN+[2]
C2 N/C (Not Connected) C2 IN-[2]
D1 HS[2] D1 IN+[3]
D2 N/C (Not Connected) D2 IN-[3]
O2 HS[3] O2 N/C
4+4 pin CAN I/O Module, 2 channels
Type Number “HT 00254 OPT-A1”
X8
CAN1
X9
CAN2
1 2 3 4
1 2 3 4
Pin 01 X8 - Can1: 081 In Low
Pin 02 X8 - Can1: 082 Out Low
Pin 03 X8 - Can1: 083 In High
Pin 04 X8 - Can1: 084 Out High
Pin 01 X9 - Can2: 091 In Low
Pin 02 X9 - Can2: 092 Out Low
Pin 03 X9 - Can2: 093 In High
Pin 04 X9 - Can2: 094 Out High
5-pin PS/2 KEYBOARD Female
Pin 1: Keyboard Data
Pin 3: Ground
Pin 5: Keyboard Clock
Pin 2: Not Connected
Pin 4: Vcc +5V
Pin 6: Not Connected
5-pin PS/2 MOUSE Female
Pin 1: Mouse Data
Pin 3: Ground
Pin 5: Mouse Clock
Pin 2: Not Connected
Pin 4: Vcc +5V
Pin 6: Not Connected
3 x 3.5mm (TRS) Jacks (Line in, Line Out, Mic In)
+ 9-pin Amplifi ed Mono/Stereo Audio Out, DSUB Male
Type Number “VSD100897-1” (PCI Metal Bracket)
Line Out Line In Mic In
5 4 3 2 1
9 8 7 6
3 x 3.5mm (TRS) Jack Specifi cation / Connection:
PIN 01 TIP
Left-hand channel for stereo signals,
positive phase for balanced mono signals,
signal line for unbalanced mono signals.
PIN 02 RING
Right-hand channel for stereo signals,
negative phase for balanced mono signals,
power supply for power-requiring mono
signal sources.
PIN 03 SLEEVE Useally ground (GND)
9-pin DSUB MALE:
PIN 01 AMP_L- Left Audio Return*
PIN 02 AMP_L+ Left Audio*
PIN 03 AMP_L- Right Audio Return
PIN 04 AMP_R+ Right Audio
PIN 05 N/C No internal connection
PIN 06 N/C No internal connection
PIN 07 N/C No internal connection
PIN 08 N/C No internal connection
PIN 09 N/C No internal connection
*For Mono: connect pin 01 and 02 only